MS46322B
> 메이커별제품 > Anritsu > 네트워크 분석기
ShockLine™ Economy 벡터 네트워크 분석기 MS46322B
MS46322B™는 1MHz부터 8/20/43.5GHz까지의 주파수 범위를 갖는 Economy ShockLine 벡터 네트워크 분석기 시리즈입니다. 높은 주파수에서 내부 VNA 아키텍처를 간소화하고, 기기 비용을 절감하고, 정확도와 측정 반복성을 향상시키는 특허받은 ShockLine VNA 온칩 기술을 이용합니다.
MS46322B는 작고 튼튼한 2U 새시에 담긴 2포트 VNA입니다. 모든 시리즈는 스위프 속도가 초당 130 마이크로초이고 100dB 동적 영역이 43.5GHz보다 우수하여 엔지니어링, 제조 그리고 비용에 민감한 교육 분야에서 수동 장치를 시험하는 데 적합합니다.
- • Guaranteed performance to 43.5 GHz with Extended K™ ports
- • RF 및 마이크로파 장치 시험에 이상적입니다.
- • 빠른 스위프 속도와 넓은 동적 범위가 시험 횟수를 최소화하고 처리량을 극대화합니다
- • 우수한 정정 방향성으로 측정 불확실성을 줄일 수 있습니다
- • 시간 게이팅 옵션이 있는 시간 도메인을 사용하면 더욱 쉽고 빠르게 결함을 식별할 수 있습니다
- • 원격 제어용 LAN 인터페이스는 USB보다 견고하고 GPIB보다 빠릅니다
- • 표준 착탈식 하드 드라이브가 군과 정부 연구원에게 추가 안전을 제공합니다
- • ShockLine™ 제품군 내 공통 GUI 및 SCPI 인터페이스
- • USB 포트로 사용자 제공 모니터, 키보드 그리고 마우스에 손쉽게 연결할 수 있습니다
- • 소형 2U 패키지로 랙 공간을 효율적으로 사용할 수 있습니다
제품 사양
| Specification | ||
|---|---|---|
| Frequency Range | MS46322B-010 | 1 MHz to 8 GHz, 2-port |
| MS46322B-020 | 1 MHz to 20 GHz, 2-Port | |
| MS46322B-043 | 1 MHz to 43.5 GHz, 2-Port | |
| System Dynamic Range | 1 MHz to 10 MHz | 105 dB |
| > 10 MHz to 8 GHz1 | 115 dB | |
| > 8 GHz to 40 GHz2 | 110 dB | |
| > 40 GHz to 43.5 GHz | 110 dB | |
| 1. Crosstalk may reduce dynamic range up to 20 dB (typical) at lower IF bandwidths (≤ 10 kHz) when measuring highly reflective DUT's from 4 GHz to 8 GHz.
Reflection measurements are not affected. 2. Decrease specification by 5 dB between 8 GHz and 14 GHz. |
||
| Output Power | High (default) | 1 MHz to 8 GHz : 5 dBm > 8 GHz to 43.5 GHz : –3 dBm |
| Low | 1 MHz to 43.5 GHz : –20 dBm | |
| Data Points | 2 to 16,001 points | |
| IF Bandwidth | 10, 20, 50, 70, 100, 200, 300, 500, 700 Hz 1, 2, 5, 7, 10, 20, 30, 50, 70, 100, 300 kHz |
|
| Channels and Traces | 16 channels, each with up to 16 traces | |
| Markers | 12 markers + 1 reference marker | |
| Test Ports 1 and 2 | MS46322B-010 | N(f) |
| MS46322B-020 | Ruggedized K(m) | |
| MS46322B-043 | Ruggedized Extended-K™(m) | |
| Damage Input Levels | +23 dBm maximum, ±50 VDC maximum | |
| CPU, Memory | CPU | Intel Core™ i5 |
| Storage | Serial-ATA (SATA) Solid State Drive (> 30 GB SSD, removable) for OS, Programs, and Data | |
| Dimensions | 108 mm x 484 mm x 590 mm | |
| Weight | < 11 kg | |
옵션 & 악세서리
| Instrument Models | |
|---|---|
| Base Model | MS46322B, 2-Port ShockLine Economy VNA |
| Required Option (Select one frequency option only) |
MS46322B-010, 1 MHz to 8 GHz, type N(f) ports MS46322B-020, 1 MHz to 20 GHz, type Ruggedized K(m) ports (compatible with 3.5 mm and SMA connectors) MS46322B-043, 1 MHz to 43.5 GHz, type Ruggedized Extended-K™(m) ports (compatible with standard K (2.92 mm), 3.5 mm and SMA connectors) |
| Included Accessories | |
| Each VNA comes with a power cord and instructions on where to download software and related literature. | |
| Main VNA Options | |
| MS46322B-001 | Rack Mount, adds handles and removes feet for shelf-mounting into a 19 inch universal rack |
| MS46322B-002 | Time Domain with Time Gating |
| MS46322B-024 | Universal Fixture Extraction |
| Removable SSD Kit | |
| 2000-1858-R | Spare SSD Disk Drive Kit |
| Calibration Options | |
| MS46322B-097 | Accredited Calibration, with data |
| MS46322B-098 | Standard Calibration, ISO 17025 compliant, without data |
| MS46322B-099 | Premium Calibration, ISO 17025 compliant, with data |
| Precision Automatic Calibrator Modules | |
| Precision Automatic Calibrator Module | |
| MN25208A | 2-port USB SmartCal Module, 300 kHz to 8.5 GHz (available with various connector options) |
| MN25408A | 4-port USB SmartCal Module, 300 kHz to 8.5 GHz |
| MN25218A1 | 2-port USB SmartCal Module, 300 kHz to 20 GHz |
| MN25418A | 4-port USB SmartCal Module, 300 kHz to 20 GHz |
| 36585K-2M | K Connector Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(m) |
| 36585K-2F | K Connector Precision AutoCal Module, 70 kHz to 40 GHz, K(f) to K(f) |
| 36585K-2MF | K Connector Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(f) |
| 2000-1809-R | Serial to USB Adapter (required for use with 36585 AutoCal module if control PC does not have a serial port) |
| 1. Applies to Rev 2 SmartCal Modules. MN25218A with serial numbers <1817999 operate from 1 MHz to 20 GHz | |
| Mechanical Calibration Kits | |
| 3650A | SMA/3.5 mm Calibration Kit, Without Sliding Loads |
| 3650A-1 | SMA/3.5 mm Calibration Kit, With Sliding Loads |
| 3652A | K Connector Calibration Kit, Without Sliding Loads |
| 3652A-1 | K Connector Calibration Kit, With Sliding Loads |
| 3653A | N Connector Calibration Kit, Without Sliding Loads |
| OSLN50A-8 | Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| OSLNF50A-8 | Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| TOSLN50A-8 | Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| TOSLNF50A-8 | Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| OSLN50A-18 | Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
| OSLNF50A-18 | Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
| TOSLN50A-18 | Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
| TOSLNF50A-18 | Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
| TOSLK50A-20 | Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 20 GHz, 50 Ω |
| TOSLKF50A-20 | Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 20 GHz, 50 Ω |
| TOSLK50A-40 | Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 40 GHz, 50 Ω |
| TOSLKF50A-40 | Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 40 GHz, 50 Ω |
| TOSLK50A-43.5 | Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 43.5 GHz, 50 Ω Includes .s1p files for data-based calibration support |
| TOSLKF50A-43.5 | Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 43.5 GHz, 50 Ω Includes .s1p files for data-based calibration support |
| Verification Kit | |
| 3663-3 | N Connector Verification Kit |
| 3668-4 | K Connector Verification Kit |
| RF Cables and Adapters | |
| N120-6 | RF Cables, Semi-Rigid, N(m) to N(m), 1 each, 0.01 to 18 GHz, 50 Ω15 cm (5.9 in) |
| NS120MF-6 | RF Cables, Semi-Rigid, N(f) to N(f), 1 each, 0.01 to 18 GHz, 50 Ω15 cm (5.9 in) |
| 1091-26-R | SMA(m) to N(m), DC to 18 GHz, 50 Ω |
| 1091-27-R | SMA(f) to N(m), DC to 18 GHz, 50 Ω |
| 1091-80-R | SMA(m) to N(f), DC to 18 GHz, 50 Ω |
| 1091-81-R | SMA(f) to N(f), DC to 18 GHz, 50 Ω |
| 71693-R | Ruggedized adapter, K(f) to N(f), DC to 18 GHz, 50 Ω |
| 33KK50C | Calibration Grade Adapter, DC to 43.5 GHz, K(m) to K(m), 50 Ω |
| 33KKF50C | Calibration Grade Adapter, DC to 43.5 GHz, K(m) to K(f), 50 Ω |
| 33KFKF50C | Calibration Grade Adapter, DC to 43.5 GHz, K(f) to K(f), 50 Ω |
| 34NN50A | Precision Adapter, N(m) to N(m), DC to 18 GHz, 50 Ω |
| 34NFNF50 | Precision Adapter, N(f) to N(f), DC to 18 GHz, 50 Ω |
| 34NK50 | Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω |
| 34NKF50 | Precision Adapter, N(m) to K(f), DC to 18 GHz, 50 Ω |
| 34NFK50 | Precision Adapter, N(f) to K(m), DC to 18 GHz, 50 Ω |
| 34NFKF50 | Precision Adapter, N(f) to K(f), DC to 18 GHz, 50 Ω |
| 34VFK50A | Precision Adapter, DC to 43.5 GHz, V(f) - K(m), 50 Ω |
| 34VFKF50A | Precision Adapter, DC to 43.5 GHz, V(f) - K(f), 50 Ω |
| 34VK50A | Precision Adapter, DC to 43.5 GHz, V(m) - K(m), 50 Ω |
| 34VKF50A | Precision Adapter, DC to 43.5 GHz, V(m) - K(f), 50 Ω |
| K220B | Precision Adapter, DC to 40 GHz, K(m) to K(m), 50 Ω |
| K222B | Precision Adapter, DC to 40 GHz, K(f) to K(f), 50 Ω |
| K224B | Precision Adapter, DC to 40 GHz, K(m) to K(f), 50 Ω |
| Test Port Cables, Flexible, Ruggedized, Phase Stable | |
| 15NNF50-1.0B | 1.0 m (39”), DC to 18 GHz, Test Port Cable, Flexible, Phase Stable, N(f) to N(m), 50 Ω |
| 15NNF50-1.5B | 1.5 m (59”), DC to 18 GHz, Test Port Cable, Flexible, Phase Stable, N(f) to N(m), 50 Ω |
| 15NN50-1.0B | 1.0 m (39”), DC to 18 GHz, Test Port Cable, Flexible, Phase Stable, N(m) to N(m), 50 Ω |
| 15LL50-1.0A | 1.0 m (39”), DC to 20 GHz, Test Port Cable, Armored, Phase Stable, 3.5 mm(m) to 3.5 mm(m), 50 Ω |
| 15LLF50-1.0A | 1.0 m (39”), DC to 20 GHz, Test Port Cable, Armored, Phase Stable, 3.5 mm(m) to 3.5 mm(f), 50 Ω |
| 15KK50-1.0A | 1.0 m (39”), DC to 20 GHz, Test Port Cable, Armored, Phase Stable, K(m) to K(m), 50 Ω |
| 15KKF50-1.0A | 1.0 m (39”), DC to 20 GHz, Test Port Cable, Armored, Phase Stable, K(m) to K(f), 50 Ω |
| Phase-Stable 18 GHz and 43.5 GHz Semi-Rigid Cables (Armored) | |
| 3670N50-1 | 0.3 m (12”), DC to 18 GHz, N(f) to N(m), 50 Ω |
| 3670NN50-1 | 0.3 m (12”), DC to 18 GHz, N(m) to N(m), 50 Ω |
| 3670N50-2 | 0.6 m (24”), DC to 18 GHz, N(f) to N(m), 50 Ω |
| 3670NN50-2 | 0.6 m (24”), DC to 18 GHz, N(m) to N(m), 50 Ω |
| 3670K50A-1 | 0.3 m (12”), DC to 43.5 GHz, K(f) to K(m), 50 Ω |
| 3670K50A-2 | 0.6 m (24”), DC to 43.5 GHz, K(f) to K(m), 50 Ω |
| Phase-Stable 20 GHz and 40 GHz Test Port Cables (Flexible) | |
| 3671KFS50-60 | 60 cm (23.6 in), DC to 20 GHz, K (f) to 3.5 mm (m), 50 Ω |
| 3671KFSF50-60 | 60 cm (23.6 in), DC to 20 GHz, K (f) to 3.5 mm (f), 50 Ω |
| 3671KFKF50-60 | 60 cm (23.6 in), DC to 40 GHz, K (f) to K (f), 50 Ω |
| 3671KFK50-100 | 100 cm (39.4 in), DC to 40 GHz, K (f) to K (m), 50 Ω |
| Transit Case | |
| 760-269 | ShockLine VNA Transit Case, Hard plastic with wheels |
| Tools | |
| 01-200 | Calibrated Torque End Wrench, GPC-7 and Type N |
| 01-201 | Torque End Wrench, 5/16 in, 0.9 N·m (8 lbf·in) (for tightening male devices, for SMA, 3.5 mm, 2.4 mm, K, and V connectors) |
| 01-203 | Torque End Wrench, 13/16 in, 0.9 N.m (8 lbf.in) (for tightening ruggedized SMA, 2.4 mm, K and V test port connectors) |
| 01-204 | End Wrench, 5/16 in, Universal, Circular, Open-ended (for SMA, 3.5 mm, 2.4 mm, K, and V connectors) |
